Short Burst Data: Clear SBD Message Buffer(s)
+SBDD - Short Burst Data: Clear SBD Message Buffer(s)
Exec Command: +SBDD
This command is used to clear the mobile originated buffer, mobile terminated buffer or both.
The parameter identifies which buffers are cleared.
|0||Clear the mobile originated (MO) buffer.|
|1||Clear the mobile terminated (MT) buffer|
|2||Clear the MO and MT buffers|
Clearing the MT/MO Buffers
Using this command or power cycling the phone are the only means by which both
buffers are cleared.
Relevant on the 9602-SB, this command does not clear the Codephase data buffer (see
+SBDCW), which may therefore still be sent in the next mobile originated SBD message.
The mobile terminated (MT) buffer will be cleared when an SBD session is initiated.
Sending a message from the ISU to the ESS does not clear the mobile originated (MO)
Reading a message from the ISU does not clear the mobile terminated buffer.
The command response is:
|0||Buffer(s) cleared successfully|
|1||An error occurred while clearing the buffer(s)|